Menu

Category: Flooring DIY

Hardwood Floors VS Laminate Flooring

Are hardwood or laminate floors better designed? This is a common debate when the owners decide to change the floor when they leave to make some improvements at home. When you buy a floor of a house, you have the option among several options. However, hardwood and laminate floors are two options that offer durability, appearance, and quality. However, deciding which of them is the best option is not an easy task, since both have their own characteristics.

Below is a comparison between wooden floors and laminate floors.

Laminate flooring

Unlike natural wood floors, laminates are not made of real wood. The high-density fibrous material or the wood chip compound is the material used to make them and the melamine infusion paper to add the top layer to the ground. Laminate floors also have a thickness of 3/4 inches, as do hardwood floors. Aluminum oxide is also included in the top layer. That is why they are much more resistant to scratches than hardwood floors since real wood can be scratched easily. Laminate floors are also more durable. There are several options for laminate flooring available today, including those that mimic the appearance of real wood. Although they are not made of real wood, they can wear out after a while. They can also lose their freshness, being lifeless and opaque, if they are not well maintained. Like wood floors, laminates can also be installed by interlacing or gluing them together.

Wooden floor

As the name suggests, the wooden floors are made of real wood. They are an integral part of solid wood. The total thickness of 3/4 of these floors is made of wood with a solid natural finish. Natural colors tend to be quite versatile and almost any color can be complemented by giving them a proper finish. For example, you can create an elegant look by choosing mahogany boards or you can create a rustic look using pine or rustic oak. To maintain their shine, they should be regularly swept, and sometimes also waxed or greased. There are two ways to install a hardwood floor: you can use a blocking element or stick it to the floor surface. In this way, you can create a floating floor, which is easier to replace if necessary. The installation is also very easy. Another cost-effective alternative is designed hardwood floors, which have the same refined quality with textures and similar grains. If you’d like to learn more contact Carpet One Floor & Home

Why Should You Choose Hardwood Flooring Instead of Laminate Flooring?

Unsurpassed durability

The high-quality hardwood floors are designed to be superior to laminates in terms of strength. They can withstand the damage caused by furniture and other heavy items and are much less prone to cracks, flaking, and dents.

Timeless versatility

Do you want a really personalized floor? The finish of the laminate floor cannot be changed, but a modern parquet floor can be sanded and customized to obtain different treatments and dyes. This will ensure that you get the best floor to complement your style and decoration.

Easier to repair

Hardwood can be sanded to repair imperfections. This is one of its greatest advantages. Greased hardwood floors are particularly impressive because they are easy to repair if scratched. All you have to do is sand the affected area and apply a thin layer of maintenance oil. The same can not be said for laminate flooring, which is difficult and takes a long time to repair. Even if you buy laminate panels that go together, you may find it difficult to find appropriate replacement panels, depending on the age of your floor and the amount of sunlight you are exposed to.

Real wood floors, especially oiled hardwood floors, can be a reasonable long-term investment for your property. Homes with hardwood floors succeed again and again in the real estate market. After all, wood is always beautiful and warm. It can also last a lifetime with proper care. It is also relatively easy to maintain and will always look great. The hardwood floor may seem expensive at first, but its benefits certainly outweigh its initial cost, considering its useful life.

Whether you’re investing in hardwood floors or renovating your home with affordable laminates, it’s important to consider your lifestyle and priorities before making a decision. If you want to invest in your home and get the benefits later when you sell, hardwood flooring is a good option, but if you want to rebuild your home on a small budget or if you have an active home, Laminate is more likely to satisfy your needs. needs

How To Install Carpet In Any Room In Your Home

You might need to install a carpet in your home because of various reasons. The carpet you are currently using might have worn out after being used for some time. You might also need to redecorate your home so that you can have a better-looking carpet. Regardless of the reason, you need to install it properly. Here is how to install carpet in the right manner.

First Step

The first thing you need to do is to remove the already existing carpet from the room. To remove the carpet you can start by vacuuming it so that you do not breathe the fine dust that might be on the carpet. If the carpet is worn out you can use a utility knife to cut it into strips so that you can have an easier time removing it. You should start removing the carpet from one end where you should remove it from the tackless strips and then roll it until it is in a position where you can remove it easily.

Second Step

After removing the carpet you should then ensure that the floor is properly cleaned. This includes repairing any minor damages that might be on the floor. This mainly depends on the materials used to make your floor. The cleaning should also involve removing the tackles strips that were being used with the old carpet. After you have cleaned the room you will have an easier time taking measurements of the room.

Third Step

The third step of installing the carpet is putting new tackles strips all around the perimeter of the room. You should install the strips about half an inch from the wall as they face the wall. The only space you should leave without the strips is in front of the doorway.

The third step of installing the carpet is putting new tackles strips all around the perimeter of the room. You should install the strips about half an inch from the wall as they face the wall. The only space you should leave without the strips is in front of the doorway.

Fourth Step

The fourth step should be to lay the underlay which should be laid in strips. The strips should not overlap each other and the underlay should be on the inner side of the tackless strips. If there are bigger underlay strips you should trim them to ensure that all the tackless strips are visible. You should then staple the underlay to ensure it is firmly on the floor.

Fifth Step

After laying the underlay you should then get the carpet into the room. It is advisable not to install the carpet immediately you get it into the room. This is because a change in temperature from where it was stored to the room where it is to be installed can make it shrink or expand. It is advisable to leave the carpet in the room for about six hours so that it can adapt to the temperatures of the room.

Sixth Step

When you are sure that the carpet has adapted to the temperatures of the room you should then proceed to lay it on the floor. On the edge of the carpet, you should leave about four to six edges of the carpet overlapping the wall. You should then trim the carpet in a way that it will fit perfectly by the wall.

Seventh Step

In case the carpet is in pieces, you should ensure that the pieces fit properly against each other so that no space will be left in between and the pieces will not overlap. You can leave the pieces overlapping by about four inches and then cut the excess part so that the pieces can fit perfectly. After ensuring that the pieces fit properly you should use seaming tape on the lower side of where the pieces meet with the adhesive part being up. You can use a seaming iron to activate the adhesive and then carefully place the edges of the pieces.

Eighth Step

After rolling the carpet all over the room you should then proceed to attach it. You can use a knee kicker to ensure the carpet is perfectly hooked on the tackless strips. The knee kicker is usually padded on one side and as a result, you can use your knee to stretch the carpet and attach it to the tackless strips. You can also use a carpet stretcher which is longer than the knee kicker. You should ensure that all the around the room the carpet is attached to the tackless strips.

Final Step

After you are sure that the carpet has been properly installed you can then put back the things such as furniture that were initially in the room. You can also cut the areas that need to be cut such as vent openings. Therefore, through following the outlined guidelines on how to install carpet you can be able to effectively and perfectly install a carpet.